Temperature/RH Monitoring Systems to Reduce Mold
- Two sensors on 20' cables.
- No paper charts, pens, or maintenance.
- Monitor -100°C, -80°C, -20°C, -20°C, 41°C.
- Stores and shows 10 month temperature chart
- Uploads to
computer or network.
- Triggers alarm or optional phone
dialer.
- Complies with 21 CFR 11 requirements.
- Accurate and inexpensive.
|
Graphs Temperature/Humidity
|
"All Mold Can Cause Health Effects"
Molds can grow anywhere there is moisture. Although it helps to periodically check humidity, that really only tells you what the humidity is at that moment. If you think you have moisture trapped in the walls, attic, closets, or the basement you should measure the temperature and humidity over a period of weeks or even months.
During long dry spells the moisture may be very low but can build up rapidly during the hot summer months when temperatures in those enclosed spaces can easily reach over one hundred degrees.
Could your building be sick?
The
ThermaViewer™ uses external probes to track humidity and temperature. It's probes can be placed in walls, attics, closets, under sinks, or where ever you think you might have moisture buildup. If the RH shows more than 60% it is time to call in professional help or at least take measures to reduce the humidity.
Moisture control-the key to mold control.
The EPA says, "keep humidity less than 60% to prevent mold growth."
No charts, pens, or maintenance
Specifications Application Notes |
