| Number of Channels |
Temperature only - 2, temp/RH - 4 |
| Size |
8 3/8" x 5" x 1 3/8" |
| Sample Interval |
User selectable 5 sec-24 hrs |
| Display Resolution |
0.1° on LCD, 0.0001 on PC |
| Temp Range: |
Sensor dependent. |
| Thermistor: |
-20°C to 75°C (±0.3
°C), ( ±.2
°C option) |
| Thermistor/RH: |
-20°C to 75°C (±0.3
°C),
±2.5% RH 0.5% Repeatability |
| Thermistor with SS sensor: |
-62°C to 120°C (±0.3
°C) |
| Humidity |
2% - 99% (± 2% at 23°C) Noncondensing |
| Calibration |
Optional NIST traceable |
| Characterization: |
One - three point table stored on 02 or 05 sensors |
| Data Storage Technique |
Battery backed-up SRAM |
| SRAM |
80000 samples per channel |
| Power |
12vdc, 50/60hz (wall adaptor) |
| Battery Backup |
>48 hrs w sleep mode set to 30 seconds. 9vdc battery. |
| Output to PC |
RS232 via custom cable |
| PC Software |
Site license included |
| Indicators |
LCD & LED |
| Controls |
Seven buttons on membrane switch |
| User Settings |
Via onboard password protected menu system |
| LCD Pixels |
240 horizontal x 128 vertical |
| LCD Temperatures |
Operating 0°C to 50°C, storage -20°C to 68°C |
| LCD size |
2.5" x 4.5" |
| LED |
Green indicates AC power present |
| Relay |
Contact with 2 terminal clamp<30v fused for .1 amp |
| Alarm conditions |
min & max for time interval |
| Mounting |
Wall mount via screw slots or industrial Velcro. |
| Display weight |
1 lb |
| Shipping weight |
4.0 lbs with power adaptor, sensors & cables |
1 Stability thermistors are chemically stable and not significantly affected by aging or exposure to strong nuclear radiation. The table below shows typical stability for a representative thermistor.
(877) 241-0042 Toll Free
